Installing sewing head in cabinet, Fingers – SINGER W711 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OTOR-LIGHT
'
plugs
INSTALLING SEWING HEAD IN CABINET
BACK ■
SET SCREW
TO CLEAR
HINGE HOLE
lift
flap
TO LOWER
HEAD INTO
CABINET
IGHT
HEAD HINGE
HOLES
HEAD HINGES
HINT: STRETCH
JT
r
UBBER BAND
across
the
two
HINGES TO HELP
HOLD THEM^UP
RIGHT WHILE
MOUNTING THE
SEWING HEAD.
1.
Loosen both head hinge set screws
until head hinge hole is clear.
2.
Tilt head hinge
fingers
up and back
as far as they will go.
3.
Carefully slip head onto head hinges
- - making sure
fingers
are inserted
as far as they can go into head hinge
holes.
4.
Allow the head to rest in its tilted-
back position.
5.
Tighten both set screws securely with
screw driver.
6.
Plug electrical leads into sockets lo
cated inside cabinet. Cord identified
with "motor'' tag must be plugged
into
socket
marked
"motor".
Un
tagged cord goes to "light" socket.