And oiling the shuttle, Cleaning – SINGER W711 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
cleaning
AND OILING THE SHUTTLE
5ec Fig 5.- anu o.
■ .n mechanism occasionally becomes
The stitch
and Imt. This will interfere
clogged with 1°°;®
of the machine. Cleaning
the efiicien. op^
safeguard the performance,
and removal of
assembly, proceed as follows :
To remove the sh
the needle reaches its
Turn the balance
hinges,
highest position. Tilt hea
Remove
bobbin case.
clamps (B) outward
Turn the two snut e
and remove the shuttle race
body ID .
shuttle, and shuttle race
Clean the shutt e r
cover by removí g
completed, proceed as
"^^"\'^"eplacTthe shuttle assembly:
follows to replace th
^
1
.
2
.
3.
4.
2
.
3.
4.
5.
1
fVio <rillU.ttl© cLSSSIXlDiy •
ows to replace t
^^aches its
Turn the balance
highest position.
A . 1. 1 _ t-vr\i
Fig. 51
-e.......... -
,
.'n in race against shuttle driver and adjust into position.
Place shuttle body, v •-
fitting pm at lower edge into notch, and lock
Replace
shuttle
^^^®J°7lamps
'(B),
making
certain
the
clamps
have
been
snap
with shuttle race cover clamps, .
.,
into position.
Pul lilt boU'n^ti'lnto're shuttle, fitting tongue into notch E of race cover.
____into position
snapped securely