Edgestitcher, Attachments, Fig. 56 – SINGER W711 User Manual
Page 30: Fig. 55 edgestitcher, Attachment foot, Fig. 57 fig. 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
30
lStitiS5*6aiL.'
Fig. 55
EDGESTITCHER
The edgestitcher is used in mak
ing dainty lace insertions, edgings
and piping.
,
The
slots
in
the
edgestitcner
serve
as
guides
in
sewing
together
various
pieces
of
material.
If
you
want to sew lace, lace and embroi
dery, or lace and tucked strips togeth
er, place the piece of material that
will be on top in slot 1 (Fig. 56)
and the lower fabric in slot 4. For
instance, if you are sewing lace edg
ing to a finished edge of fabric place
the fabric in slot
1
and the lace in
slot 4 Fig. 57.
ATTACHMENTS
Be sure the needle positioning lever i
extreme left hand position
s i n t r i e
ATTACHMENT FOOT
In
order
to
attach
the
binder,
edgestitcher
ana
the hemmers, it is necessary to remove the presser
foot and replace it with the attachment foot. Fig. 5o
Mount
binder,
edgestitcher
or
hemmers
sliding
the
attachment
to
the
left
as
far
as
possible
and
tighten screw
The mounting slot enables you to sew as close
to or as far away from the edge as desired. Just move
the attachment to the correct position before tighten
ing the mounting screw.
Fig. 57
Fig. 56