Folded binding, Two-tone binding (fig. 65), Bias binding – SINGER W711 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32
B I N D E R
binding and applies it to the
fh!
Dinde- are for corresponding widtns ot commercial
^‘:-
bLd^r scroll IS used for unfolded bias strips cut 15 16 men wiae,
(Fig. 64')
This attachment folds bias
Slots on scroll of the binde
The open mouth
FOLDED BINDING
Cut a point on folded binding, insert in appropriate
slot
Draw through slot aud under
»>*)>
pin Test stitching to be sure it is on the edg .
]
by sliding binder to right or left.
TWO-TONE BINDING (Fig. 65)
Two bindings can be sewn on fabric edge also in one
operation. When two are used, always ^kiP one siz
tween widths, inserting each in correct size slot.
HAND-CUT
BIAS BINDING
(Fig. 64)
Cut 15'16 inch bias binding fold in half for a couple
of inches. Cut binding d-gonaHy toward end almost o
fold Slip fold into center of binder. Draw bacK imtii
cut opens and binding encircles open end of scroll. Te
stitching to be sure it is on the edge, adjust
and 63 for
suggestions
on how to use
the
binder.
There
are
hundreds
of
other uses.
Fig. 63
rat:
Fig. 64