Automatic embroidery – SINGER W165 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
-rraiK
I S
E. Drop feed, lock stitch width at 4, take 3 or 4 stitches, leave needle in faJbric left of stitches.
. _
. _. on needle to make next daisy petal. Uontinue until tiower design is complete.
Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.
Fig. 24
Fig. 2S
AUTOMATIC EMBROIDERY
Your machine will produce embroidery patterns automatically by inserting anyone of its
cams (Fig. 24) in the chamber on top of the machine.
Be sure the zigzag needle plate and zigzag presser foot are on the machine, and the
zigzag stitch width stops "3" are in the off positions.
With zigzag stitch width lever "2" (Fig, 25) in its extreme right hand position, place cam
on spindle, apply slight pressure while turning cam until it slips down into place.