Attachment foot, The edgestitcher – SINGER W165 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3 2
ATTACHMENT FOOT
In ordei CO attach the binder, edgestitcher and the
hammers, it is necessary to remove the presser foot and
replace it with the attachment foot, Fig. 41.
'Mo.unt binder, edgestitcher or hedimers sliding the
attachment to the left as far as possible and tighten
screw.
The mounting slot enables you to sew as close to or
as far away from the edge as desired, just move the
attachment to the correct position before tightening the
mounting screw.
Fig. 41
THE EDGESTITCHER
The .edgestitcher is used in making
lace
insertions,
edgings
and
pipings.
Til© slots sorv© cLS Q"uici©s. Xo SSW 1©G©
edging to fabric, place the material you
want on top in slot, Fig. 42, and other
piece in slot 4.
To trim with a wide piping, place
Fig. 43
Fig, 42
the fabric in slot 4, and the fold of the piping, to the left in slot 3. For a narrow piping, place
the fabric in slot 2 and the folded edge of the piping to the right in slot 3,
Slot 5 may be used as a guide in stitching a french seam.