Section ii - threading & tension, Preparation for threading spool holders, Spool caps – SINGER WSL2000 ATS (Part 1) User Manual
Page 14: Spool nets
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION II - THREADING & TENSION
Preparation for Threading
For large cones of thread, use the black plastic
cone holders. This will help hold the cone of
thread in place.
When using small spools, remove the
plastic cone-spool holders (a drop of oil will
make the holder slide off easily), and place the
spool directly on the spool pin. Use the spool cap
to keep the spool in place and to prevent the
thread from catching on edges of the spool.
Spools of specialty thread sometimes work loose
from the spool during sewing, causing tangling or
irregular thread feeding. To prevent this use the
spool net provided as shown.
Domestic cotton reel
Cone type thread
Thread comes off the top
NOTE: Specialty threads, such as fine perle cotton. Designer 6 by YU®, Ribbon Flos^,
and Pearl Crown Rayon® by YU may be used in the loopers of your Superlock.
For successful stitching be sure these threads feed off their spools or skeins easily.