Outside corners, Machine settings, Fabric – SINGER WSL2000 ATS (Part 1) User Manual
Page 30: Tension settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
You can stitch neat outside corners with little practice on your Superlock.
Stitch Length: 2.5 •
Stitch Width: 6
Medium weight woven
Serge (Sew along edge of fabric; do not trim.)
•Sew along one side of fabric to the end.
•Raise the needles and presser foot.
•Gently slide the threads off the stitch
finger of the needle plate by pulling fabric toward back of Superlock.
•Grasp the fabric gently and turn the corner.
•Realign the edge of the fabric and put the cut edge of the fabric against the cutter.
•Pull up slack in threads.
•Lower presser foot.
•Serge the edge. Repeat for the remaining corners.