SINGER WSL2000 ATS (Part 1) User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

THREADING UPPER LOOPER

Open front covers.

Bring the upper looper to its lowest position by turning the handwheel toward you

Draw thread from spool and pass it through the thread stand (back to front), under

thread clip guide (1) and then, in order, through guides 2-4 as illustrated below and

inside the front cover of your Superlock.

With the presser foot raised to release tension, lay thread between
thread tension discs. (2) Be sure thread is all the way into the tension discs.

Snap thread into guide A, B, and C (illustration 3), then thread the hole of the upper
looper (4) using the tweezers provided if necessary.

Bring thread tail under foot and toward back left corner of your Superlock.

14

Advertising
This manual is related to the following products: