R.e^i4icuim4f the stucu jle*ix^tlt – SINGER W231 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
13
R.e^i4icUiM4f the StUcU Jle*ix^tlt
^ondAMsAxi SeiuiHif
The length of the stitch can be changed with the stitch length
dial (Fig. 23). In order to set a certain length of stitch, turn
the dial from 0~4 until the selected number on the scale is
facing the alignment mark on the stitch length dial. The
length of the stitch is increasing from 0~4. The normal
stitch is 2.
(leAfXxJatiHAf tUe. StitcU jHetUftU
/^e4*e^Ue SetiUAtf
a. Regulate the length of the stitch as for forward sewing
(see above).
b. Push reverse stitch button located above the stitch length
(Fig. 23) as far as it will go. The machine will then sew
in reverse with the same stitch length as previously select
ed. During reverse sewing, push the reverse stitch button
all the time. After release the machine resumes forward
sewing with the same stitch length.
UtA StiioU JBexu^tU
Sewixuf
The stitch length dial regulates the length of the zigzag stitch for zigzag sewing in the same
manner as for straight sewing. In order to produce the "Satin Stitch” which is the closest zigzag
stitch, set the stitch length dial close to 0.
Fig. 23