Ju^eadihf the maokine. & needle – SINGER W231 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

*JU^eadiHf the Maokine. & Needle

1. Turn the balance wheel toward you to raise the needle

bar to its highest position.

2. Place a spool of thread on the spool pin.

3. Lead the thread through the arm thread-guide Fig. 4).
4. Draw the thread down through the thread-guide to the

tension discs from right to left and up.

5. Draw the thread up through the check spring.
6. Draw the thread under the thread retainer bar and take

the thread up, and run the end through the eye of the
thread take-up lever from right to left.

7. Draw the thread down through the face plate guides and

then through the needle clamp thread guide.

8. Draw the end of the thread through the eye of the needle

FROM LEFT TO RIGHT, drawing it through about 3 or
4 inches. You are now ready to sew.

Pig. 4

Advertising