SINGER W231 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ClzaH.i4Uf, tlm Slu4>tile Rjcux.

When the thread is tangled in the race or lint gets into the
space between the shuttle and shuttle-race, this will cause
abrupt heavy running or complete stoppage of the machine.

When this occurs
L Raise the needle bar to its highest position and take the

bobbin case out.

Fig. 11

Fig. 10

2.

Pull the KNOBS (A) on both side of shuttle race (Fig.

10 & 11) aside, then take out the outside ring and the

shuttle body with your fingers.

3.

After shuttle-race and bobbin case have been cleaned,

put all of them back in reverse order

Advertising