SINGER W1266 - Manual (Page 31)

30
TROUBLE CHART
Trouble Probable Cause
Correction
If Machines
Binds Thread or lint in
raceway
1—With take-up lever in highest position, tilt
head back on hinges and remove bobbin case.
BOBBIN
N O T C H R A C E
LATCH /
r a c e c o v e r C L A M P S
2- Turn clamps outward and remove race cover.
3- Remove hook.
4- ^Clean thread and lint from all parts, includ­
ing race.
5 -Run a drop of oil along rim of hook.
6—Replace hook, then race cover. Snap clamps
into place.
7..- Grasp threaded bobbin case by latch and re­
place, fitting tongue into notch of race cover.