SINGER W1266 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
5 0
LIFT FLAP
Back oii both head hinge set screws
until head hinge hole is clear.
Tilt head hinge tongues up and back
as far as they will go.
Carefully slip head onto head hinges
- - making sure tongues are inserted
as far as they can go into head hinge
holes.
Allow the head to rest in its tilted-
back position.
Tighten both set screws securely with
screw driver.
Plug electrical leads into sockets lo
cated inside cabinet. Cord identified
with "motor" tag must be plugged
into
socket
marked
"motor".
Un
tagged cord goes to "light" socket.
Advertising