SINGER W1266 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
46
OVERCASTING WORN EDGES
Zigzag stitch along the worn edges, catching the fabric as the
needle swings to the left, and allowing the needle to just pass-
over the edge of the fabric on the right Fig. 98
PATCHING
Machine
baste
patch
into
place under hole or worn area
which has been cut away. Then
zigzag stitch the patch into place
by overcasting around edge of
hole. Fig. 99
Fig 99
STRAIGHT OR THREE CORNERED TEAR
Zigzag stitch along a straight tear catching fabric on left and
right side of tear by swing of needle. Be sure your tensions are
not too tight or puckering will be encountered.
In mending a three cornered tear, zigzag stitch from each end
to center pig. 100
' '
jl
V . •’
"¿X'.- ‘-V
Fig. 100