SINGER W1266 - Manual (Page 46)

,a
ijLwJii
SHAPING DARTS IN INTERFACINGS
45
3
3-2
Center
Fig. 95
Cut interfacing down center between dart lines.
Overlap cut edges, matching dart lines. Zigzag stitch
along marking line from point to wide end of dart.
Trim both raw edges close to stitching.
Most fabrics need to be guided only in front of the presser foot as shown at le|t. Many
filmy sheers, crepes, knits, tricots, etc., require support while being stitched. For such fabric use
the straight stitch throat plate and presser foot and apply gentle tension by holding seam in
I,«Til-
Kaffir ni tbo nrefisser foot as shown at riaht.