Manual operation – SINGER W1776 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 1
MANUAL OPERATION
Be sure standard zigzag presser foot and zigzag needle
plate
are
in
place
and
machine
is
set
for
manual
operation
Use tor:
'
OVERCASTING WORN EDGES
Zigzag stitch along the worn edges, catching the fabric as
the needle swings to the left, and allowing the needle to just
pass over the edge of the fabric on the right (Fia 371
PATCHING
Machine bastes patch into place by placing fabric under
hole or worn area which has been cut away. Then zigzag
a p p l i q u e
overcasting around edge of hole.
Fig. 36-Baste design to fabric and zigzag stitch following
the shape of the design outlining it entirely and remove excess
material on the outer edge by trimming it away after stitching.
Fig^ 38-Baste design to fabric and overcast a zigzag stitch
around the design outlining it entirely.
Hundreds
of
other
uses
will
become
apparent
as
you
con
tinue
to
use
the
machine.
Also,
for
best
result
set
speed
control
slower
when
sewing
around
contours
and
faster
for
straight lines.
Fig. 36
Fig. 37
Fig. 38