The set of hemmers, Hemmer set, Hemmers -40 – SINGER W1776 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE SET OF HEMMERS
39
Before attaching any of the hemmers, be sure bob
bin thread is pulled up. Then, with hemmer in place,
hold top thread loosely and turn handwheel one full
turn toward you, making a loop under hemmer. Grasp
bobbin thread with both hands and slip horizontal
ly under hemmer toward back. Bobbin thread will
catch loop and carry upper thread to back of hem
mer.
Fold material to suit for two inches along edge,
hold at each end of fold. Slip fold into guide and
up over spoon (Fig. 76). Fold hem in material back of hemmer. Draw forward
and fasten with point of needle. Pull on threads gently as you start stitching.
Fig. 76
to end of he
HEMMER SET
You can make a hem
or 'ii" in width, depending upon which
hemmer you use. For a few of the many uses see Figs. 77, 78, 79 80 81
and 82.