Winding the bobbin – SINGER W1776 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
» I
■l.''
Fig. 3
Fig. 4
WINDING THE BOBBIN
D.sengoge the hand wheel (,. Fig 3) fron, the stitch,ng n,echan,sm by turning the clutch
KZ, Fig. 3) toward you or counter clockwise.
uiurcn
amie?f3\T°F°' O
through the arm top thread
9
es-(3.&4, F,g.5) and the bobbin winder tension disc at the right front of bedplate (5,Fig.5)
Run end of thread through a hole in the left
flange of bobbin from inside to outside and
3;
, ,
place bobbin on spindle of bobbin winder
*
fitting the notch on bobbin over
small
pin
on
spindle.
Press
bobbin
winder
latch
(7,
Fig.
4)
down,
and
hold
thread
end
loosely then start machine slowly.
Bobbin
will
stop
winder
when
it
is
filled.
Turn
clutch
away
from
you
until
sewing
mechanism
is
again
engaged
so
that
needle
moves when you turn the hand wheel.
Break off loose thread end used to stort
FiO- 5
the winding.