Installing sewing head in cabinet, Installation-head in cabinet – SINGER W1776 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
49
INSTALLING SEWING HEAD IN CABINET
1. Ic30sen head hinge set screws unti\ head
hinge hole is clear.
2. Till head hinge fingers up and back as
far as they will go.
3. Carefully slip head onto head hinges
--making sure fingers are inserted as far
as they can go into head hinge holes.
4. Albw the head to rest in its lilledback
position.
5. Tighten both set screws securely with
screw driver.
6. Plug electrical leads into sockets bcated
inside cabinet. Cord identified with
“motor” tog must be plugged into socket
marked "motor" Untogged cord goes to
“lighi’’ socket.
Advertising