SINGER W1220 - Manual (Page 21)

>ATIIM STITCHING
I his is useful for decoration such as tapering,
rianual designed embroidery, monogramming,
Hid applique.
(he satin stitch, which is a very close zigzag
aitch, is obtained by setting the stitch length as
lear to " 0 " as possible without stopping the
eeding action. The setting will vary for different
abrics. It may be desirable to loosen the upper
ijnsion slightly to cause the threads to lock
mderneath, in order to make the top surface
Dok especially smooth. For lightweight fabrics,
liace paper underneath the fabric while sewing
or best results.
Я
V/
Pattern: АЛЛ
Length: % Уз
Width: 15
Feed Dog: A.A.
Pressure: Normal
Foot:
All Purpose
Needle Position:
TAPERING/CREATIVE EMBROIDERY
Tapering is done by gradually increasing and
decreasing the stitch width while sewing. By this
method, tapered monograms and other in­
teresting designs can be created. For tapered
monograms run the machine fast while turning
the width dial slowly from narrow to wide and
back.
First, learn this stroke by letting the fabric guide
straight. Then, learn to pivot the fabric as you
are tapering by holding the fabric at one point.
Various strokes can be combined to form letters
and designs. Variegated thread can give attrac­
tive results.
Pattern: АЛЛ
Lenght: Уг Уз
Width: 0-5
Feed Dog: A A
Pressure: Normal
Foot: All Purpose
Needle Position:ф ► or
MANUAL EMBROIDERY DESIGNS
iJifferent designs can be made by turning the
.iiich width dial between 0 and 5. By running the
iicichine at a constant speed and turning the dial
II: a definite rhythm, various designs can be
t teated.
19
Pattern: АЛЛ
Length: Vz -’/3
Width: 0-5
Feed Dog: A A
Prssure: Normal
Foot: All Purpose
Needle Position:^ ^ or
В
и
т
т
н
о
L
Е
S
F
Е
А
Т
О У
N R
Е
S
А
N
D
Р
А
R
Т
S
Я:
1 ^ ‘