Winding the bobbin, To disengage the hand wheel, To wind thread onto bobbin – SINGER W1220 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WINDING THE BOBBIN
TO DISENGAGE THE HAND WHEEL:
• Hold the hand wheel (1) with left hand, turn clutch
counterclockwise with right hand to disengage as shown.
(
2
)
TO WIND THREAD ONTO BOBBIN:
• Lead thread through spring thread guide (4) and through the hole in
your bobbin from the inside out.
• Place the bobbin onto the bobbin winder shaft (3).
• Push the bobbin winder to the right.
• Hold loose end of thread firmly and turn hand wheel to make thread
tight. Apply gradual pressure on foot pedal until automatic shut off
disengage bobbin winder.
« Cut off loose end of thread.
s
T
R
A
I
G
H
T
A
N
D
Z
I
G
Z
A
G
B
U
T
T
H
O
L
E
S
F
E
A
T
O U
N R
E
S
A
N
D
P
A
R
T
S