Cording and zipper foot, To insert cording, Quilting guide – SINGER W1220 User Manual
Page 32: Cl f
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USE OF THE ACCESSORIES
CORDING AND ZIPPER FOOT
The cording and zipper foot is used to sew in zippers and
insert cording.
Zipper:
Set the needle position at or as needed to sew the
right side or the left side of zipper respectively, so that the
foot sews very close to the zipper teeth.
(
F
E
C
F
\
C
L
F
IV
A
C
H
I
To insert cording:
• Set the needle position at '=4" and make the welting by
sandwiching the cord into a bias strip of fabric. Stitch
close to cord.
•
Set the needle position at Sandwich the welting
between two layers of fabric with right sides together.
Stitch a second time. The needle stitches close to the
cord through all thicknesses.
QUILTING GUIDE
Parallel straight lines are easy to sew with the quilting
guide. To attach the guide, slide it into the black clip at the
back of the presser foot shank. Adjust the curved bar to
the desired distance from the needle. Sew the first line of
stitching as desired, and then for the succeeding rows let
the guide follow along the previous line of stitching. A
straight stitch, zigzag, or any other stitch may be used.
30