I changing light bulb , u – SINGER W1220 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I CHANGING LIGHT BULB
,
u
Open the face plate by pulling towards the left. Turn the light bulb
i counterclockwise to remove. Replace the bulb by turning
I clockwise.
I
A majority of service calls could be avoided by following these
procedures and by first checking to see that the machine is;
1. Threaded properly top and bottom.
2. That the bobbin is wound evenly.
|3. That the needle is in the machine correctly.
4. Proper cleaning and oiling.
OILING (GENERAL)
OIL
-OIL
Swing open hinged face plate. Apply one
drop of oil at all points indicated by arrows.
Using the large screw driver in the accessory box, remove
the two screws on the top plate and remove plate.
OIL
apply oil while turning the hand wheel.
34