Adjusting stitch width inserting a zippe, Adjusting stitch lengt, Balancing a patter – SINGER 6412 Millennium User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING STITCH WIDTH
INSERTING A ZIPPE
• Move lever to widen or narrow
stitch.
• When using twin-needle do not set
width wider than twin-needle
graphic.
ADJUSTING STITCH LENGT
• For shorter stitch move lever to
left.
• For longer stitch move lever to
right.
BALANCING A PATTER
mm
HH
• Machine has been balanced at
factory to optimum balance.
• Only selected patterns may be
balanced (see following pages).
• Before attempting to balance a
pattern make sure stitch length is
set at 4.
• Push lever left to open pattern or
right to close pattern.
J
RECOMMENDED SETTINGS
Stitch Selection:
Stitch
Stitch Width: i I I 11
t •
stitch Length: 1.5-3
Foot:
Zipper
• Baste zipper opening.
• Attach left side of foot to shank.
• Stitch zipper to seam allowance.
• Attach right side of foot to shank.
• Stitch zipper to seam allowance.
12
—