Inserting wound bobbin raising bobbin thread – SINGER 6412 Millennium User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSERTING WOUND BOBBIN
RAISING BOBBIN THREAD
m m a
Open slide plate.
Insert bobbin into bobbin case.
• Guide thread into notch (1)
and then into notch (2).
• Pull thread under and back of
presser foot.
• Close slide plate.
• Hold needle thread.
• Turn hand wheel towards you
lowering, then raising needle.
Gently pull needle thread to raise
bobbin thread.
Open loop.
• Pull both threads back under
presser foot.
7
—
Advertising
This manual is related to the following products: