Blindstitc overedging and seaming – SINGER 6412 Millennium User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BLINDSTITC
OVEREDGING AND SEAMING
• Fold hem to wrong side.
• Pin or baste in place.
• Fold hem back as shown.
Loosen screw (1) to install
blindstitch guide.
Tighten screw.
Place folded edge against
blindstitch guide.
Sew, allowing wide stitches to
enter edge of fold.
Turn fabric to right side and press.
be used for overcasting.
• For overcasting edge of fabric to
prevent fraying.
For hemfinishing on fabrics to
prevent rolling.
Use with stretchy material which
tends to fray or foil.
For stitching and finishing seams in
light weight fabrics.
For overcasting edge of fabric to
prevent fraying.
For stitching and finishing seams in
heavyweight or stretch.
—
16