SINGER P-1250 Professional User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Be sure power switch is < OFF ». INSERT machine plug (A) into the
machine socket. CONNECT the transformer (B) to your electrical
outlet.
Check that machine is threaded correctly (see pages
6
and 7).
< This machine is not intended for garment construction.»
T O B E G I N M E N D I N G
1
. TURN hand wheel (A) clockwise, raising needle to highest
position.
2. LIFT foot (B) with foot lever (C).
TO CONNECT YOUR MACHINE
3. POSITION area to be mended under foot.
• TURN hand wheel clockwise, lowering needle into existing
stitches in fabric.
• Lower foot.
• GUlOB fabric toward back of machine.
• TURN machine “ON" and machine will begin operating
Immediately.
• Continue running machine until new stitches overlap
existing stitches.
• When mend is completed, TURN power "OFF".
4. RAISE needle to highest position: LIFT foot.
• MOVE fabric toward back of machine.
• CUT threads 4" (10cm) from edge of fabric.
Your mend Is now completed!
-2-