SINGER P-1250 Professional User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
T O R A I S E T H E L O W E R T H R E A D
All machines making a lockstitch sew with both an upper and
lower thread. Thè thread coming through the needle's eye is the
upper thread. The thread coming from the bobbin is the lower
thread. Before mending, the lower thread must be brought up to
meet the upper thread. To do this:
1
. RAISE foot.
• HOLD upper thread lightly with left hand.
• Slowly TURN hand wheel. 1 revolution clockwise, moving
needle down and up again.
• Gently PULL thread in left hand, drawing up a loop (A) of
lower thread.
2. UNDO loop with your fingers until you find the end of the
lower thread.
3. PULL
6
" (15cm) of upper-and lower threads under foot and
toward back of machine.
-7-