SINGER P-1250 Professional - Manual (Page 6)

When the needle is broken or dull, replace it as follows:
• OPEN door for better visibility.
• UNTHREAD needle.
• TURN hand wheel clockwise until needle clamp screw (A) is
easy to see.
• LOWER foot.
• HOLD needle with fingers and LOOSEN clamp screw one turn
with screwariver.
• LOWER needle and REMOVE.
• To replace needle: LOWER needle, with flat side to the back
of the machine, into hole under foot, then up into clamp as far
as it will go.
• TIGHTEN needle clamp screw.
TO CHANGE YOUR NEEDLE
For best results, change your needle periodically, using Singer
#3347-14 needles, which may be ordered on the enclosed form.
-5-