Instructions for'cabinet installation – SINGER WS1145 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSTRUCTIONS FOR'CABINET INSTALLATION
1.
Loosen head hinge set screws until
head hinge hole is clear.
2.
Tilt head hinge tongues up and back
as far as they will go.
3.
Carefully slip head onto head hinges
making sure tongues are inserted as
far as they can go into head hinge
holes.
4.
Allow the head to rest in its tilted
back position.
5.
Tighten both set screws securely with
screw driver.
6.
Plug
electrical
leads
into
sockets
located inside cabinet. Cord identified
with
"motor"
tag
must
be
plugged
into socket marked "motor". Untagged
cord goes to "light" socket.
Advertising