Sewing thin or light weight fabrics, Darning and monogramming – SINGER WS1145 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING THIN OR LIGHT
WEIGHT FABRICS
When,
lighter
pressure
is
required
to
sew
satisfactorily on thin silk or filmy material, the
pressure cap should be about halfway down.
Release all the way by pressing the snap
lock, ((T), Fig. 19) and then press cap ((D, Fig.
20) down again to halfway spot.
Fig, 19
DARNING AND
MONOGRAMMING
In order to move the fabric freely in any
direction for darning, mending and certain kinds
of
free-hand
embroidery,
release
the
cap
((f).
Fig.
20)
completely
by pressing down
on the
snap lock, C(T),Fig. 19). Set the lever to "DOWN",
which
drops
the
feed
well
below
the
needle
plate. To return feed to normal, set to "UP",
push cap down (Fig. 20).
12