Threading the bobbin case – SINGER WS1145 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image


Fig. 6

Step 1 (illustrated in Fig. 7) Hold bobbin case between

thumb and forefinger of left hand, so that the slot in the

edge of the bobbin case is on top. Take the bobbin between

thumb and forefinger of right hand so that the thread on

top leads from left to right. Step 2. Insert bobbin into

bobbin case, pull the thread into the slot of the bobbin

case as shown in Fig. 8, and draw it under the tension

spring and into the fork-shaped opening of the spring as

shown in Fig. 9.

Fig. 7

Fig. 9