NordicTrack 831.29882 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4. Locate the two tabs on the Reading Rack (12). Slide the

tabs up into the two slots in the front of the Console (78).
Attach the Reading Rack to the Console with the six
Screws (43).

5. Attach a Weight Rack (112) to each Upright (70) with two

Screws (43) as shown.

Refer to the inset drawing. Insert a 2-lb. Handle (115) and

two 1-lb. Weights (114) into each Weight Rack (112).

6. Remove the two indicated Screws (43) from the left Upright

(70).

Attach the Storage Latch (5) and the two Latch Spacers
(93) to the left Upright (70) with the two Screws (43), Be
careful not to overtighten the Screws.

Note: If it is difficult to fold or lower the treadmill,

remove one or both of theJ=atch Spacers (93).

7. Remove the backing from the Wrench Clip (88). Press the

Wrench Clip onto the Upright (70) in the indicated location.
Press the Allen Wrench (87) into the Wrench Clip

8. Make sure that all parts of the treadmill are properly

tightened. Place a mat beneath the treadmill to
protect the floor or carpet.

Advertising