NordicTrack 831.29882 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Thoroughly dry the heart rate monitor after each

use. The heart rate monitor is activated when the

electrode areas are wetted and the heart rate moni­
tor is put on; the heart rate monitor shuts off when it

is removed and the electrode areas are dried. If the

heart rate monitor is not dried after each use, it may

remain activated longer than necessary.

• Store the heart rate monitor in a warm, dry place.

Do not store the heart rate monitor in a plastic bag
or other container that may trap moisture.

• Do not expose the heart rate monitor to direct

sunlight for extended periods of time. Do not expose
the heart rate monitor to temperatures above 122®

Fahrenheit (50® Celsius) or below 14“ Fahrenheit
(-10“ Celsius).

• Do not excessively bend or stretch the transmitter

when using or storing the heart rate monitor.

• Clean the transmitter using wat^r and mild soap—

never use alcohol, abrasives, or chemicals. The

chest strap may be hand washed and air dried.

HEART RATE MONITOR CARE AND MAINTENANCE

If the heart rate monitor

does not function prop­

erly, the CR 2032 bat­

tery may need to be

replaced. To replace the

battery, locate the bat­
tery cover on the back of

the transmitter. Insert a

coin into the slot in the
cover and turn the cover counterclockwise to the

"open” position. Remove the cover.

Remove the old battery

and insert a new CR
2032 battery, making
sure that the battery is

turned so the writing is
on top. In addition, make
sure that the rubber gas­

ket is in place in the

transmitter. Replace the
battery cover and turn it

to the closed position.

Advertising