Show port config (sh po co), Show port routing (sh po ro) – Datacom Systems VS-1200 User Manual
Page 21
Initial Configuration
21
© 2009 Datacom Systems Inc
4.1.3.7
SHOW PORT CONFIG (SH PO CO)
This command displays all configurable related data for all ports as shown:
> SHOW PORT CONFIG (SH PO CO)
01: Name
Configuration:
Current:
Media type:
Connection type (SPAN, TAP [Ports on TAP circuit]):
Group membership:
Steering configuration:
VLAN tag status:
Example: > SH PO CO
01: Port 1
CFG: 1G Full Duplex Current: No Link
Type: Tap (1..2:)
Group Member: TAP
Copies to: 2,5,6,7,8,9,10
VLAN Tag Stripping: OFF
02: Port 2
CFG: 1G Full Duplex Current: No Link
Type: Tap (2..1)
Group Member: TAP
Copies to: 1,5,6,7,8,9,10
VLAN Tag Stripping: OFF
Press any key...
4.1.3.8
SHOW PORT ROUTING (SH PO RO)
This command displays all port interface routing in a brief matrix summary as shown:
> SHOW PORT ROUTING (SH PO RO)
Example: > SH PO RO
Outputs
01 02 03 04 05 06 07 08 09 10
01 ------------X------------------------------------------------------
02 ------X------------------------------------------------------------
03 --------------------------------------------------------------------
04 --------------------------------------------------------------------
05 --------------------------------------------------------------------
06 --------------------------------------------------------------------
07 --------------------------------------------------------------------
08 --------------------------------------------------------------------
09 --------------------------------------------------------------------
10 --------------------------------------------------------------------
>