Datacom Systems VS-1200 - Manual (Page 34)

VS-1200 Data Acccess Switch 34
© 2009 Datacom Systems Inc
Step 5. Open the Command Prompt on your PC by selecting START > All Programs >
Accessories > Command Prompt
Step 6. In the Command Prompt window, at the prompt, enter TELNET and hit the Enter key. (To
see a list of available Microsoft Telnet Client Commands, at the prompt, enter ? and hit the
Enter
key. Supported commands will be displayed.)
Step 7. At the Command Prompt window prompt, enter o 192.168.1.1 and hit the Enter key.