ADLINK USB-1903 - Manual (Page 23)

Introduction 9
USB-1900 Series
1.7.2 DAQPilot
DAQPilot is a SDK with a graphics-driven interface for various
application development environments. DAQPilot represents
ADLINK's commitment to full support of its comprehensive line of
data acquisition products and is designed for the novice to the
most experienced programmer.
As a task-oriented DAQ driver, SDK and wizard for Windows sys-
tems, DAQPilot helps you shorten development time while accel-
erating the learning curve for data acquisition programming.
You can download and install DAQPilot at:
http://www.adlinktech.com/TM/DAQPilot.html
Please note that only DAQPilot versions 2.3.0.712 and later can
support the USB-1900 Series.
1.8 Utilities for Windows
1.8.1 U-Test
U-Test is a free and ready-to-use utility which can assist instant
testing and operation of all ADLINK USB DAQ series functions
with no programming. In addition to providing data collection and
monitoring functions, U-Test also supports basic FFT analysis and
provides direct control of analog output and digital I/O with a
user-friendly interface.
You can download and install U-Test at: http://www.adlink-
tech.com/