ADLINK ACL-6126 User Manual
Page 12
6 • Installation
2.2 Unpacking
Your ACL-6126 card contains sensitive electronic components that can
be easily damaged by static electricity.
The card should be put on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point
as the anti-static mat.
Inspect the card module carton for obvious damage. Shipping and
handling may cause damage to your module. Be sure there is no
shipping and handling damage on the module before processing.
After opening the card module carton, extract the system module and
place it only on a grounded anti-static surface with components side up.
Again inspect the module for damage. Press down on all the socketed
IC's to make sure that they are properly seated. Do this only with the
module place on a firm flat surface.
Note : DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your ACL-6126.