ADLINK ACL-6126 - Manual (Page 22)

16 • Installation
2.10 Software Installation
The ADLINKCD includes a utility software and some demonstration
programs which can help you to reduce your application programming
effort and support the calibration of analog outputs.
Installation
To install the DOS library software and utilities, please follow the
following installation procedures:
1. Put ADLINK CD into the appropriate CD-ROM drive.
2. Type the following commands to change to the card’s directory
(X indicates the CD-ROM drive):
X:\>CD \NuDAQISA\6126
3. Execute the setup batch program to install the software:
X:\NuDAQISA\6126> SETUP
After installation, all the files of ACL-6126 Library & Utility for DOS are
stored in C:\ADLink\6126\DOS directory.
Running Utility
After finishing the installation, you can execute the utility by typing as
follows :
C>cd \ADLINK\6126\DOS\UTIL
C>6126UTIL
C Language Programming
Three example programs in C language are supported in the directory
<SAMPLES>, you can refer to these samples and modify them for your
own application.