ADLINK PCI-7260 - Manual (Page 17)

Installation 7
2 Installation
This chapter outlines the contents of package, describes unpack-
ing procedure, and describes how to install PCI-7260 into your
host system.
2.1 What you have
In addition to the User’s Manual, the package includes the follow-
ing items:
X
PCI-7260 non-latching relay and digital input cards
X
ADLINK All-in-One CD
X This User’s Manual
If any of these items are missing or damaged, contact your
ADLINK dealer. Save the shipping materials and carton in to ship
or store the product in the future.
2.2 Unpacking
Your PCI-7260 card contains sensitive electronic components that
can be easily damaged by static electricity.
The card should be operated on a grounded anti-static mat. The
operator should be wearing an anti-static wristband, grounded at
the same point as the anti-static mat.
Inspect the card module carton for obvious damage. Shipping and
handling may cause damage to your module. Be sure there are no
shipping and handling damages on the module before processing.
After opening the card module carton, extract the system module
and place it only on a grounded antistatic surface with component
side up.
Again inspect the module for damage. Press down on all the
socketed IC's to make sure that they are properly seated. Do this
only with the module place on a firm flat surface.
Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your PCI-7260.