ADLINK PXIS-2508 User Manual
Page 18
Advertising
8
Chassis Overview
LED Indications
Alarm Reset Button
The alarm reset button enables you to stop the chassis alarm
during an error or critical system event. To stop the alarm,
press the alarm reset button.
LED
Status
On
Off
Blinking
Power (Blue)
DC voltages are
supplied
normally.
No DC power is
supplied.
• 5 V or 3.3 V exceeds
±7% range
• 12 V or -12 V exceeds
±12% range
Fan (Green)
Fans are
operating
normally.
The system is
off.
Any of the fans is
operating in a speed
lower than 500 RPM
Temp (Amber)
Chassis
temperature is
normal
The system is
off.
Chassis temperature
exceeds 50°C
Advertising