3 installation, 1 installing the system controller, Installing the system controller – ADLINK PXIS-2508 User Manual
Page 27: 3installation
Installation
17
3
Installation
The chapter tells you how to install the system controller, periph-
eral modules, and drivers to the PXIS-2508/2558T chassis. It also
provides information on cooling considerations, and installation/
calibration of the touch panel (PXIS-2558T only)
3.1
Installing the System Controller
The PXIS-2508/2558T comes with a system controller slot that
supports a PXI system controller. We recommend the following
system controllers for use with the PXIS-2558T:
X
PXI-3800 Series for PXIS-2558T-A model
X
PXI-3900 Series for PXIS-2558T-B model
To install the system controller:
1. Make sure that the CPU, memory module(s), and stor-
age device(s) are properly installed on the system con-
troller module.
2. Locate the system controller slot (Slot 1).
3. Push down (loose) the system controller module’s ejec-
tor/injector handle(s).