4 powering up the system, Powering up the system – ADLINK PXIS-2508 User Manual
Page 32
Advertising
![background image](/manuals/733423/32/background.png)
22
Installation
3.4
Powering up the System
The PXIS-2508/2558T is equipped with a universal power supply
unit that does not require input voltage selection.
To turn on the system:
1. Connect one end of the supplied power cable to the
power connector located at the rear side of the chassis.
2. Plug the other end of the AC power cord to a properly
grounded wall socket or power strip.
3. Turn on the main power switch (|).
Advertising