ADLINK PXIS-2690P - Manual (Page 15)

Chassis Overview 7
2.5 Backplane overview
The cBX-3014L backplane supports both PXI modules and stan-
dard CompactPCI cards. The backplane’s P1 connector signals
comply with the requirements of CompactPCI specifications for
both peripheral and system modules.
PXI-specific signals are located on P2. Only those signals
reserved or not used for the CompactPCI 64-bit specification are
found on PXI specific signals, allowing all modules that comply
with the former to function in the chassis.
Figure 2-6: cBX-3014L Front View
Figure 2-7: cBX-3014L Rear View