ADLINK PXIS-2690P - Manual (Page 31)

Installation 23
3.7 Powering up the System
The PXIS-2690P is equipped with a universal power supply unit
that does not require input voltage selection.
To turn on the system:
1. Connect one end of the supplied power cable to the
power connector located at the right side of the chassis..
2. Plug the other end of the AC power cord to a properly
grounded wall socket or power strip. When power is
available, the chassis goes to standby power mode
(OFF).
3. Press the power button from the front panel to turn the
system on. The power LED in the front panel lights up
green and the chassis fans start to operate.