ADLINK PCI-7856 - Manual (Page 19)

Installation 7
PCI-7856
User’s Manual
2.3 Software Driver Installation
Using the All-In-One CD with PCI-7856 package and execute the
following steps:
1. Auto-run the ADLINK All-In-One CD.
2. Follow the installation steps of the installer.
3. After installation is completed, restart your Windows
operating system.
Note: The latest software can be downloaded from the ADLINK
website: www.adlinktech.com.
2.3.1 Troubleshooting
If the system doesn’t boot or if any erratic behavior of the
PCI board is experienced, it is most likely caused by an interrupt
conflict. The solution, once determined it is not a simple over-
sight, is to consult the BIOS documentation that comes with
your system. Check the control panel of the Windows system if the
card is listed by the system. If not, check the PCI settings in the
BIOS or use another PCI slot.