2 hsl distributed i/o manager – ADLINK PCI-7856 User Manual
Page 70
Advertising
58
MotionCreatorPro
2
5.3.2
HSL Distributed I/O Manager
This page can be used to test the HSL system and slave modules.
After executing the I/O management page, the main operation
window shown below will appear. You can select the module for
testing in the tree list of left window. The corresponding ID will also
appear with each module. For example, the following figure shows
the management pane for the HSL-AI16AO2-VV module. Analog
input information is presented in this window and you can use the
sliding bar to control the analog output.
Operation Instructions:
A. Tree view of whole HSL and Motionnet modules
B. Analog input presentation
C. Analog output control panel
D. Check the communication status of each module.
A
B
C
D
Advertising