ADLINK PCI-7856 - Manual (Page 81)

MotionCreatorPro 2 69
PCI-7856
User’s Manual
5.4 Return Error Code
The meaning of error codes are described below:
 (-1) Operation System type mismatched
 (-2) Open device driver failed - Create driver interface failed
 (-3) System memory insufficient
 (-4) Cards not be initialized

(-5) Cards not found (No card in your system)

(-6) Duplicate cards ID

(-7) Cards have been initialed

(-8) Cards' interrupt events not enabled or not be initialized

(-9) Function time out

(-10) Function input parameters are invalid

(-11) Set data to EEPROM failed

(-12) Get data from EEPROM failed

(-13) Function is not available in this step, The device is not
support this function or Internal process failed
 (-14) Firmware error, please reboot the system

(-15) Previous command is in process

(-16) Duplicate Axis ID

(-17) Slave module not found

(-18) System ModuleNo insufficient

(-51) Set data to SRAM failed

(-52) Get data from SRAM failed

(-1000) No such INT number, or WIN32_API error, contact
ADLINK's FAE staff