ADLINK PCI-7856 - Manual (Page 73)

MotionCreatorPro 2 61
PCI-7856
User’s Manual
Single Movement
Operation Instructions:
A. Command, feedback, error and target position informa-
tion. Command and feedback speed information. The
minimum speed value may limit by speed calculation
cycle time for low speed display.
B. Optional operation setting and button. The repeat mode
check box can be used in relative and absolute mode.
The axes will move between two positions or forward/
backward distance cyclically. You can set the delay time
between each move in unit of mini-second. The mini-
mum value is 1ms. The stop button is for relative, abso-
lute and velocity modes.
A
B
C
D